Ramp showing all the components

Ramp Color Samples

Pebble

Biscuit

Autumn Gray

Fabric Samples

Vanilla

Black

Gray

Camel

 

 

Versatile Add-a-Ramp
Add-a-Ramp is modular and the key components are straight ramp sections, 5' x 5' square turn or landing platforms, curved turn sections and even steps. The picture on the right includes all these options.

Ramp Configuration Choices
Width - 36" or 44" wide as measured between the handrails. 36" is primarily used for residential applications and 44" for commercial.

Straight ramps - offered in 3' and 6' lengths

5' x 5' square - used as a top landing or 90 degree turn. Two landings joined together creates a 5' 10' turn landing.

Curved section - used to make a 90 degree turn and two will make a 180 degree turn. The curve sections are less expensive than a square landing and have a smaller footprint.

Steps - Offered in a 4 step unit (28" high) and a 5 step unit (35") high.

Ramp Color Choices
The molded ramp sections are available in three colors. The most popular color is Pebble because it hides dirt. The color is much lighter than shown on this web page so ask your dealer to show you a color sample. The colors biscuit and autumn gray are not stock colors and have a longer leadtime.

Ramp Fabric Choices
The optional fabric is a vinyl coated outdoor mesh material that allows wind to pass through. The mesh also is translucent and offered in four colors.